Deutz-Fahr 6190

FZ 48-33.1
Order now!

FZ + Deutz-Fahr 6190
The perfect combination.

STOLL always fits. Attach, get going and experience the full power.

  • Wide sleeved bearings on the moving parts with lubrication points that can be easily accessed from the outside.
  • Quick to mount and dismount in just two minutes thanks to the proven STOLL drive-in system.
  • All the hydraulic lines are under the beam rail, to ensure they are well protected and the driver has a clear view.
  • Double-acting lifting cylinders for a particularly high lifting capacity.
  • The Z-kinematics frees the view of the implement and ensures even greater lifting power.
  • The cross bar is optimally positioned for the best view and to protect the hydraulic lines at the front.
  • Safe and reliable parking stands that are easy to use – completely without implements.
  • Euro quick release frame for attaching the implement in seconds with semi-automatic or electro-hydraulic locking mechanism.

PROFILINE NEXT GENERATIONPROFILINE NEXT GENERATION SIZE 6SIZE 6
PROFILINE NEXT GENERATIONmech. parallel linkage SIZE 6FZ 48-33
PROFILINE NEXT GENERATIONwithout parallel linkage SIZE 6
PROFILINE NEXT GENERATIONSuitable for tractors with kW/hp kW
hp
SIZE 6130-200
180-270
PROFILINE NEXT GENERATIONLifting force in the implement’s pivot point below
above
Q1
Q2
daN
daN
SIZE 63.320
2.230
PROFILINE NEXT GENERATIONLifting force (blade) 300 mm before the pivot point below
above
N1
N2
daN
daN
SIZE 63.320
2.230
PROFILINE NEXT GENERATIONLifting force (pallet) 800 mm before the pivot point below
above
M1
M2
daN
daN
SIZE 63.320
2.230
PROFILINE NEXT GENERATIONBreakout force 800 mm before the pivot point below R daN SIZE 64.140
PROFILINE NEXT GENERATIONMaximum lift height in the implement’s pivot point H mm SIZE 64.800
PROFILINE NEXT GENERATIONOverloading height (H-210) L mm SIZE 64.590
PROFILINE NEXT GENERATIONDump height A mm SIZE 63.750
PROFILINE NEXT GENERATIONDump width W mm SIZE 6880
PROFILINE NEXT GENERATIONDigging depth S mm SIZE 6210
PROFILINE NEXT GENERATIONPivot point of lifting arms B mm SIZE 62.180
PROFILINE NEXT GENERATIONTilt angle below X °degree SIZE 645
PROFILINE NEXT GENERATION rescooped X1 °degree SIZE 662
PROFILINE NEXT GENERATIONDump angle above Z °degree SIZE 658
PROFILINE NEXT GENERATIONPump output rate l/min. SIZE 6120
PROFILINE NEXT GENERATIONStroke time sec. SIZE 63,8
PROFILINE NEXT GENERATIONTilting time, implement sec. SIZE 60,5
PROFILINE NEXT GENERATIONDumping time, implement sec. SIZE 61,2
PROFILINE NEXT GENERATIONWeight, lifting arms without implement kg SIZE 6886


The values given are averages. Depending on the type of tractor, these values may deviate up or down. Calculated at 195 bar hydraulic pressure!

> Till nyhetsarkivet ...