Kubota 4063

Solid 35-18
Order now!

Solid + Kubota 4063
The perfect combination.

STOLL always fits. Attach, get going and experience the full power.

  • mechanical parallel linkage
  • the same drive-in system as with PROFILINE front loaders
  • excellent tilt and dumping angle
  • low tare weight
  • improved performance characteristics
  • modern look
  • optional machinery and equipment: hydro-fix upper part, 3rd + 4th pilot circuit and comfort drive
  • special paint finish available

SOLIDSOLID 35-1835-18
SOLIDTYPE 35-18 P SOLID H
Suitable for tractors with kW / horsepower 35-18kW
PS
SOLID40-60
55-80
Lifting power l at attachment pivot point lowered
raised
Q1
Q2
35-18daN SOLID1.810
1.270
Lifting power (bucket) 300mm in front of the pivot lowered
raised
N1
N2
35-18daN SOLID1.810
1.270
1.520
1.050
Lifting power (fork) 900 mm in front of pivot lowered
raised
35-18M1
M2
SOLIDdaN 1.810 1.270 1.160 780
Breakout power 900 mm in front of pivot 35-18 SOLIDR daN 2.310 1.570
35-18Max. Lift height at attachment pivot SOLID H mm 3.460
35-18Loading height SOLID L mm 3.250
35-18Dump height SOLID A mm 2.390
35-18Dump clearance SOLID W mm 650
35-18Digging depth SOLID S mm 210
35-18Boom pivot SOLID B mm 1.660
35-18Rollback angle SOLIDlowered X ° degrees 43
35-18Dump angle raised SOLID Z ° degrees 63
35-18Pump performance SOLID l/min. 50
35-18Raising time SOLID sec. 4
35-18Rollback time, attachment SOLID sec. 1,5
35-18Dump time, attachment SOLID sec. 1,7
35-18Weight, loader boom w/o attachment SOLID kg 335 35-18290


Values given are averages. Depending on tractor type, variations up and down will occur.

* Because of danger of rolling the tractor, front loader work can only be carried out with a suitable counter weight. Calculated with 195 bar hydraulic pressure!

> Al newsarchiv ...