Fendt Vario 314

FZ 41-29.1 rot
Order now!

FZ + Fendt Vario 314
The perfect combination.

STOLL always fits. Attach, get going and experience the full power.

  • Wide sleeved bearings on the moving parts with lubrication points that can be easily accessed from the outside.
  • Quick to mount and dismount in just two minutes thanks to the proven STOLL drive-in system.
  • All the hydraulic lines are under the beam rail, to ensure they are well protected and the driver has a clear view.
  • Double-acting lifting cylinders for a particularly high lifting capacity.
  • The Z-kinematics frees the view of the implement and ensures even greater lifting power.
  • The cross bar is optimally positioned for the best view and to protect the hydraulic lines at the front.
  • Safe and reliable parking stands that are easy to use – completely without implements.
  • Euro quick release frame for attaching the implement in seconds with semi-automatic or electro-hydraulic locking mechanism.

PROFILINE NEXT GENERATIONPROFILINE NEXT GENERATION SIZE 3 SIZE 3
PROFILINE NEXT GENERATIONmech. parallel linkage SIZE 3 FZ 41-29
PROFILINE NEXT GENERATIONwithout parallel linkage SIZE 3
PROFILINE NEXT GENERATIONSuitable for tractors with kW/hp kW
hp
SIZE 3 65-90
90-120
PROFILINE NEXT GENERATIONLifting force in the implement’s pivot point below
above
Q1
Q2
daN
daN
SIZE 3 2.880
1.930
PROFILINE NEXT GENERATIONLifting force (blade) 300 mm before the pivot point below
above
N1
N2
daN
daN
SIZE 3 2.880
1.930
PROFILINE NEXT GENERATIONLifting force (pallet) 800 mm before the pivot point below
above
M1
M2
daN
daN
SIZE 3 2.880
1.930
PROFILINE NEXT GENERATIONBreakout force 800 mm before the pivot point below R daN SIZE 3 3.540
PROFILINE NEXT GENERATIONMaximum lift height in the implement’s pivot point H mm SIZE 3 4.100
PROFILINE NEXT GENERATIONOverloading height (H-210) L mm SIZE 3 3.890
PROFILINE NEXT GENERATIONDump height A mm SIZE 3 3.060
PROFILINE NEXT GENERATIONDump width W mm SIZE 3 790
PROFILINE NEXT GENERATIONDigging depth S mm SIZE 3 210
PROFILINE NEXT GENERATIONPivot point of lifting arms B mm SIZE 3 1.945
PROFILINE NEXT GENERATIONTilt angle below X °degree SIZE 3 44
PROFILINE NEXT GENERATION rescooped X1 °degree SIZE 3 61
PROFILINE NEXT GENERATIONDump angle above Z °degree SIZE 3 57
PROFILINE NEXT GENERATIONPump output rate l/min. SIZE 3 90
PROFILINE NEXT GENERATIONStroke time sec. SIZE 3 3,8
PROFILINE NEXT GENERATIONTilting time, implement sec. SIZE 3 0,6
PROFILINE NEXT GENERATIONDumping time, implement sec. SIZE 3 1,3
PROFILINE NEXT GENERATIONWeight, lifting arms without implement kg SIZE 3 657


The values given are averages. Depending on the type of tractor, these values may deviate up or down. Calculated at 195 bar hydraulic pressure!

Read more ...
> Do newsarchivu ...