Lindner Lintrac 115 LS

FZ 39-23
Order now!

FZ + Lindner Lintrac 115 LS
The perfect combination.

STOLL always fits. Attach, get going and experience the full power.

  • Wide sleeved bearings on the moving parts with lubrication points that can be easily accessed from the outside.
  • Quick to mount and dismount in just two minutes thanks to the proven STOLL drive-in system.
  • All the hydraulic lines are under the beam rail, to ensure they are well protected and the driver has a clear view.
  • Double-acting lifting cylinders for a particularly high lifting capacity.
  • The Z-kinematics frees the view of the implement and ensures even greater lifting power.
  • The cross bar is optimally positioned for the best view and to protect the hydraulic lines at the front.
  • Safe and reliable parking stands that are easy to use – completely without implements.
  • Euro quick release frame for attaching the implement in seconds with semi-automatic or electro-hydraulic locking mechanism.

PROFILINE NEXT GENERATIONPROFILINE NEXT GENERATION SIZE 2SIZE 2
PROFILINE NEXT GENERATIONmech. parallel linkage SIZE 2FZ 39-23
PROFILINE NEXT GENERATIONwithout parallel linkage SIZE 2
PROFILINE NEXT GENERATIONSuitable for tractors with kW/hp kW
hp
SIZE 250-75
70-100
PROFILINE NEXT GENERATIONLifting force in the implement’s pivot point below
above
Q1
Q2
daN
daN
SIZE 22.300
1.550

PROFILINE NEXT GENERATIONLifting force (blade) 300 mm before the pivot point below
above
N1
N2
daN
daN
SIZE 22.300
1.550
PROFILINE NEXT GENERATIONLifting force (pallet) 800 mm before the pivot point below
above
M1
M2
daN
daN
SIZE 22.300
1.550
PROFILINE NEXT GENERATIONBreakout force 800 mm before the pivot point below R daN SIZE 22.910
PROFILINE NEXT GENERATIONMaximum lift height in the implement’s pivot point H mm SIZE 23.850
PROFILINE NEXT GENERATIONOverloading height (H-210) L mm SIZE 23.640
PROFILINE NEXT GENERATIONDump height A mm SIZE 22.810
PROFILINE NEXT GENERATIONDump width W mm SIZE 2700
PROFILINE NEXT GENERATIONDigging depth S mm SIZE 2210
PROFILINE NEXT GENERATIONPivot point of lifting arms B mm SIZE 21.800
PROFILINE NEXT GENERATIONTilt angle below X °degree SIZE 244
PROFILINE NEXT GENERATION rescooped X1 °degree SIZE 261
PROFILINE NEXT GENERATIONDump angle above Z °degree SIZE 257
PROFILINE NEXT GENERATIONPump output rate l/min. SIZE 275
PROFILINE NEXT GENERATIONStroke time sec. SIZE 23,4
PROFILINE NEXT GENERATIONTilting time, implement sec. SIZE 20,6
PROFILINE NEXT GENERATIONDumping time, implement sec. SIZE 21,3
PROFILINE NEXT GENERATIONWeight, lifting arms without implement kg SIZE 2604


The values given are averages. Depending on the type of tractor, these values may deviate up or down. Calculated at 195 bar hydraulic pressure!

> S’abonner maintenant a la lettre d’informations ...